Availability: | |
---|---|
Quantity: | |
Screw Air Cooled
ZYC
PRODUCT ADVANTAGE
SCREW COMPRESSOR
- Equipped with high-efficiency screw refrigeration compressors from leading manufacturers like Bitzer, Hanbell, Fusheng, Refcomp, and more
- Larger capacity per compressor reduces the quantity of compressors on large projects
- Simple and robust design which provides high reliability, and low vibration and noise level
- Efficient multi-level energy regulation can be achieved in 4-stage (25% -50% -75% -100%) mode or infinite (50% -100%) mode to meet different load requirements.
WIDE APPLICATION
- Designed to provide stable temperature control for processing cooling, cold storage and quick freezing, including high temperature (-5℃~+12℃), medium temperature (-23℃~0℃), and low temperature (-45℃~-13℃)
- Flexibility in the selection of synthetic refrigerants
COMPREHENSIVE DESIGN
- Enlarged air-cooled condenser, available in either horizontal or vertical air discharge orientation
- In low-temperature applications, a stainless-steel economizer is installed, along with the corresponding expansion valve, solenoid valve, and dried filter, to achieve higher full loading cooling capacity and enhance overall performance.
- Liquid receiver with safety valve
- Fine selection of oil separator, suction accumulator, oil cooler and other refrigeration parts to protect the compressor and maximize energy efficiency ratio
- High and low-pressure protection, compressor overload protection
- Pressure testing and leak detection before leaving the factory
SMART CONTROL
- Equip with a cold-rolled steel or stainless-steel control panel, integrated with a Siemens PLC, 7’ HMI, and remote-control functionality, fully tested and pre-wired to compressor before leaving the factory
- Temperature controller with temperature and current display
- Refrigeration and defrosting control; compressor, condenser fan and evaporator fan contactors with overload safety switch; phase failure relay; delay timer, fault alarm and other functions on request
NON-STANDARD CUSTOMIZATION
- Voltage/Frequency/Phase
- The configured capacity of liquid receiver will be increased if it is a piping system
TECHNICAL PARAMETERS
Medium to High Temperature Series
Voltage | 380V 50Hz 3Ph | ||||||||
Nominal Power | 50HP | 60HP | 70HP | 80HP | 90HP | 100HP | 125HP | 160HP | |
Air Cooled | Model NJZY- | 050AYL-CSH | 060AYL-CSH | 070AYL-CSH | 080AYL-CSH | 090AYL-CSH | 100AYL-CSH | 125AYL-CSH | 160AYL-CSH |
Ref. Capacity (kW) | 72.2 | 90.7 | 105.3 | 122.1 | 149.8 | 163.7 | 199 | 268 | |
Power (kW) | 31.4 | 38.9 | 48.2 | 54.4 | 62.9 | 72.5 | 87.3 | 109.8 | |
Air Condenser | 120kW | 140kW | 165kW | 185kW | 220kW | 255kW | 315kW | 400kW | |
Liquid Receiver | 150L | 150L | 200L | 200L | 200L | 300L | 300L | 400L | |
Evaporation Temperature: -7℃; Condensing Temperature: 47℃; Refrigerant: R404A; Refrigeration Oil: POE | |||||||||
Compressor | CSH6553-50Y | CSH6563-60Y | CSH7553-70Y | CSH7563-80Y | CSH7573-90Y | CSH7583-100Y | CSH8563-125Y | CSH8583-160Y | |
MOC (A) | 86A | 108A | 128A | 144A | 162A | 170A | 216A | 260A | |
Suction Pipe | 54mm | 54mm | 76mm | 76mm | 76mm | 76mm | DN100 | DN100 | |
Liquid Pipe | 22mm | 28mm | 28mm | 28mm | 35mm | 35mm | 35mm | 35mm |
Low Temperature Series
Voltage | 380V 50Hz 3Ph | ||||||||
Nominal Power | 30HP | 40HP | 50HP | 60HP | 70HP | 75HP | 125HP | 160HP | |
Air Cooled | Model NJZY- | 030AYL-HSN | 040AYL-HSN | 050AYL-HSN | 060AYL-HSN | 070AYL-HSN | 075AYL-HSN | 125AYL-HSN | 160AYL-HSN |
Ref. Capacity (kW) | 51.6 | 61.9 | 69.4 | 83.5 | 95.6 | 99.7 | 162.4 | 203 | |
Power (kW) | 37.2 | 41.3 | 50.2 | 60.3 | 64.8 | 70.9 | 111.2 | 146.9 | |
Air Condenser | 125kW | 150kW | 175kW | 210kW | 240kW | 250kW | 400kW | 500kW | |
Liquid Receiver | 100L | 100L | 150L | 150L | 200L | 200L | 300L | 400L | |
Evaporation Temperature: -23℃; Condensing Temperature: 47℃; Refrigerant: R404A; Refrigeration Oil: POE | |||||||||
Compressor | HSN5363-30Y | HSN6451-40Y | HSN6461-50Y | HSN7451-60Y | HSN7461-70Y | HSN7471-75Y | HSN8571-125Y | HSN8591-160Y | |
MOC (A) | 58A | 65A | 79A | 98A | 124A | 144A | 216A | 274A | |
Suction Pipe | 54mm | 54mm | 54mm | 76mm | 76mm | 76mm | 76mm | 76mm | |
Liquid Pipe | 28mm | 28mm | 35mm | 35mm | 35mm | 35mm | 42mm | 54mm |
Please contact ZHIYUN for technical parameters of other models.
CONFIGURATION
STANDARD | screw compressor air cooled condenser liquid receiver stainless steel ECO expansion valve, solenoid valve, and dried filter for eco control panel with siemens PLC and 7' hmi oil separator in discharge line accumulator in suction line oil cooler oil way accessories safety valves stop valves solenoid valve, filter drier and sight glass in liquid line vibration eliminator complete piping: discharge line, liquid line and suction line (insulated) pressure gauges, pressure controller high and low-pressure protection, compressor overload protection pressure testing and leak detection before leaving the factory |
OPTIONAL | fan speed control refrigeration oil charge |
PRODUCT USES
APPLICATION INDUSTRY: Food and Beverages Industry, Chemical and Pharmaceutical Industry, Marine and Offshore Industry
APPLICATION SCENARIO: Commercial Refrigeration, Blast Freezer, Cold Room, Processing Cooling, Marine
content is empty!